4W - 36W Small One Screw Hole Disinfection Lamp PCBA Circuit Board For Tables
Specification
| Input voltage |
DC5V |
| Machine power |
4W-36W |
| Battery Capacity |
1200mah |
| Battery Type |
FR4 |
| On-board power input |
+5V USB 3.7-4.2V lithium battery |
| Switch |
SMD key switch
|
| Output way |
Lamp, battery, fan. |
| matching tube |
4mm 1.7W cold cathode tube, tube voltage 210V tube current 8mA |
Parameter
1. Requirements for load type, power and drive type: machine power 4W lamp 1.7W, fan 1.3W, battery charge 0.7W, loss 0.3W
2. Button, switch type, quantity, and height requirements: The copper tip of the SMD can touch a button 5.2*5.2*5mm
3. Instructions: Red 0603 is in charge, green 0603 is fully charged and blue 0603 is in operation
4. Interface terminal type requirements: PH2.0-2A-DIP for battery and fan, XH2.54-3A-DIP for lamp output, POWER input USB (Micro)
5. No battery, battery type, voltage, charging current :FR4, 28*50*1mm, green oil and white characters, lead-free tin spray, environmental protection
6.PCB mounting enclosure requirements: one screw hole and 3.5mm in diameter
Application scenarios include: disinfection in cars, children's tableware, bed sheets, bedding, office supplies, sofa, tables, chairs, shoe cabinets, etc.
Functional requirements
A. Directly charge the 3.7V 18650 lithium battery when USB is connected. The charging indicator is red and turns green after full. Neither the light nor the fan is working.
B. Press the switch and start the rear light and fan at the same time, until the switch is pressed again and turned off at the same time. No need to turn off the lights regularly. The indicator light is blue at work.
C. The lamp and fan can work with either USB or battery power alone
Package
1. Anti-static bubble film shall be used for packaging and packing after piecing together
2. Matters needing attention when packing
1) Considering the force comprehensively, the direction set up after PCBA packing should be the same as that of corrugated carton
2) Avoid the collision between PCBas during packaging; Appropriate placement and bubble film thickness should be selected
FAQ
1. What’s the MOQ of your product?
The MOQ will be uncertain, depending on how much the customers need and we can provide the product as soon as possible
2. What about the method of delivery?
We will arrange the DHL, FEDEX, UPS for the sample, but if you have large order, we will have sea delivery. And of course, we will let our customers to decide it based on their preference.
3.When can you deliver the products?
The earliest delivery will be 3-5 working days, depending on the amount of the order.
Product Tags:
|
|
Table Small One Screw Hole 4W FR4 UV Circuit Board Images
|
